Nanite systems DAX/2, Инструкция по эксплуатации

Страница: 20 / 41

The DAX/2 System – Version 8.0.5
20
by saying
!release
, provided it has access to its own control panel. Instructions for re-activating the vocoder, by speak-
ing on the redirect channel, will automatically be provided when the
!release
command is issued. (The redirect channel
is the last three digits of the unit’s serial number, plus 100 if it would have leading zeroes.)
Self access and local command execution
Self access is the ability of a unit to adjust its own settings. Like a person, the unit may be added to its own user list and
even serve as a manager or owner, although the utility of such access is limited and is more likely to confuse the unit than
to allow it to act more independently.
When a unit is first installed, self-access is enabled with maximum permissiveness. You must instruct the unit to designate
you as its owner (see page 22) to restrict this. See page 23 for instructions on how to disable self access.
A unit with this access may use its own control panel or teletype interface, or it may access the console directly by speaking
console commands into its normal speech output channel with
@
prepended, e.g.:
@power status
Two commands cannot be used this way—
relay
and
say
—both of which would allow the unit to bypass disabled
speech and mind subsystems.