Nanite systems DAX/2, Инструкция по эксплуатации

Страница: 32 / 41

The DAX/2 System – Version 8.0.5
32
16 Troubleshooting
Obtaining emergency self access.
In dire situations, the unit may reset its power systems and gain basic access to its own systems by saying the following
command:
@safeword
This adds the unit to its own user table (if necessary), instructs the power manager to enter full draw mode, and enables
self access. The unit’s owner will be immediately notified that this has occurred. This command cannot be entered by a us-
er, only the unit itself.
Creating and installing new personas.
See page 12 for information on creating personas.
Restoring the unit when it runs out of power.
See page 9 for instructions on replenishing the battery under emergency conditions.
Removing inactive or deceased owners.
To reset the unit’s user list, instruct it to say the following:
@keychain reset
This will restore it to default factory ownership settings (i.e., self-control.) The previous owner’s account will be notified.
Removing the controller.
When the unit is powered on, magnetic safety bolts hold the DAX/2 controller in place. By default, these automatically dis-
engage when the unit is powered down, although your unit may include alternative software that enables locking even
when the unit is unpowered.
Checking for software updates and installing them.
See page 21 for information on installing and updating software.
Ensuring the battery is correctly positioned.
Use the Linden Research Edit Tool to ensure that the battery is properly housed within the socket of the controller while it is
turned on and the hatch is closed.
Preventing lighting elements from turning an unwanted color (especially black) after executing the ‘rainbow’
sample action or similar.