The DAX/2 System – Version 8.0.5
11
3 Subsystems and their management
The DAX/2 permits selective control of individual power subsystems to conserve power when certain functionality is either
not needed or not desired. These can be accessed from the
subsystems
menu, or manipulated with the
power
com-
mand.
To toggle a subsystem:
Via the display screen or teletype interface
, simply select the subsystem in question. Some subsystems are or-
ganized under submenus for more convenience, or may cycle between multiple states to simplify access to depend-
ent subsystems such as rapid movement.
Via the remote console
, type the following:
power <
subsystem>
Replace <
subsystem>
with the name of the subsystem you wish to toggle (see below.) Full information on the use of
the
power
command can be obtained by typing “
power
” with no parameters.
subsystem name
menu item
provides the ability to…
power draw
requires…
video
video
see
209 W
audio
audio
hear
75 W
move
motors
move
5 W (idle)
159 W (walking)
203 W (jumping)
rapid
motors
move quickly and fly
5 W (idle)
203 W (running)
605 W (flying)
move
teleport
FTL
warp to a new location
170 W (idle)
237600 W (jump)
move
voice
volume
speak
10 W/phoneme
preamplifier
volume
speak at a normal volume
10 W/phoneme
voice
power-amplifier
volume
shout if necessary
80 W/phoneme
voice
mind
mind
speak freely (see page 18)
121 W (idle)
voice
receiver
network :: SMS receive
receive private text messages 22 W
transmitter
network :: SMS send
send private text messages
43 W
GPS
network :: GPS
determine location
58 W
identify
identify
recognize others
32 W
Note that the subsystem names are case sensitive in the command-line interface.
Tip
: To cycle through volume states via the console, type:
volume cycle
This will also automatically adjust the volume level of the unit’s status messages.
Содержание DAX/2
Страница 41: ...nanite systems com 1 800 5 NANITE 562 6483 ...