13
Manual
EASY FLOW
5. Description of disc harrow
EASY FLOW disc harrow is produced in various working widths: 4m, 4.5m, 5m, 6m and 8m.
It is equipped with a three-point linkage (TUZ) and a drawbar category - 4m, 4.5m 5m, 6m
and 8m versions.
Power Requirements:
150 HP for the 4m version,
160 HP for 4.5m version,
170 HP for the 5m version,
220 HP for 6m version
and 270 hp for the 8m version.
The main part of the aggregate is the central frame and wings that make up the transport
position using a hydraulic system with four cylinders (version 4m, 4.5m, 5m, 6m and 8m).
The transport width for the 4m, 4.5m, 5m, 6m and 8m versions is the same and amounts to
2.97.
To the middle frame and the wings are attached:
• drawbar with a category III three-point linkage beam,
• front beam assembly with disc coulters with 560mm disc diameter or other,
• rear beam assembly with disc coulters with 560mm disc diameter or other,
• the arms of the rear finger harrow assembly and kneaded roller assembly,
• rear chassis assembly controlled by a hydraulic cylinder additionally equipped with a
braking system.
Spacing between beams of disc coulters: 1200mm. Aggregate frame height over
soil surface: max 760mm. The disc coulter spacing is standard 250mm.
As a standard, the aggregate is equipped with a mechanical system of locking the wings in the
transport position, especially important when traveling on public roads.
The rear part of the aggregate is a chassis assembly with a pneumatic braking system (with
extra charge), lifted for the duration of work by means of a hydraulic cylinder to the working
position of the machine.
The hydraulic cylinder of the chassis has a special valve blocking the piston rod in a certain
position, for example - maximum deflection, which protects the chassis from uncontrolled
lifting, for example when driving on public roads.
Warning and lighting sign holders are attached to the frame. However, the aggregate is not
factory-equipped with the above-mentioned boards.
