16
Manual
EASY FLOW
6. Work with the aggregate
6.1. Connection of the aggregate to the tractor
Before hitching the aggregate, check that the tractor linkage connectors have the same length;
After inserting the coupling pins into the holes of the three-point suspension system (three-
point suspension system), secure them with cotter pins;
When reversing cause coupling of the set to the tractor;
Connect the hydraulic hoses to the tractor's external hydraulic sockets;
Connect the rear wheel brake pneumatic hoses;
Unlock the wing coupling bolt in transport position;
Fold the machine wings to a horizontal position;
Level the cultivator transversely and longitudinally by shortening or lengthening the tractor's
hitching rods accordingly;
We adjust the working depth of the machine by changing the angle of inclination of beams
using a hydraulic system consisting of four hydraulic cylinders - with a fixed position of the
rear shaft or changing the position of the pin.
In order to ensure controllability and proper operation of the drive system, it is necessary to
install in the front part of the tractor properly selected weights corresponding to the purchased
version of the machine.
6.2. Wing lock
The unit is equipped with manual wing lock in transport position (4m, 4.5m, 5m, 6m, 8m
version).
The wings must always be blocked, especially when traveling on public roads.
In order to protect the wings against accidental, uncontrolled falling, after raising the wings to
the vertical position, lock the wings by pulling the bolt fixed on the right wing of the machine,
and then insert it into the hole of the left wing plate, which will cause permanent mechanical
coupling of both wings.
