NAMCO AquaJet, Руководство оператора

Страница: 8 / 57

Page 11
4. Moving the Machine
WARNING • When moving or carrying the game, make sure to
dis-assemble the game into four parts: header
assembly, Front assembly, ride assembly and coin
tower.
• The game is fitted with castors to make it easier to
move. Take care when moving the machine on an
inclined surface.
• The game is still heavy even when separated in to
four parts, ensure that there is an adequate
number of people to move the game.
• The Header Assembly has a forward centre of
gravity, so it is important that at least two people
are used to fit or remove the Header Assembly.
• The fitting position of the Header Assembly is very
high, and it is important that a means of reaching
the height safely, without stretching, is available.
(e.g. steps, step stools etc.)
• The overall height of the main assembly is
2300mm, take care of any overhead obstructions
e.g. light fixtures.
NOTE: The Front assembly can be further dismantled by removing the
projector from the projector base.
(See section 5-1 “Removing
the Projector from the Projector Base”.)