NAMCO AquaJet, Руководство оператора

Страница: 35 / 57

Page PB
8-3-2 Replacing the Control Arm Potentiometer
WARNING • Make sure that the power is turned OFF before
commencing any work.
1) Remove the tank. (Refer to section 8-2-2 ‘Removing the Tank’).
3) Disconnect the connector. Loosen the grub screw (M4x5) and remove
the potentiometer complete with its mounting bracket.
4) Remove the potentiometer from the mounting bracket and replace
with a new potentiometer.
5) Re-assemble in reverse order.
NOTE: When refitting the potentiometer and bracket ensure that the grub
screw engages on the flat of the potentiometer shaft, and the lug
on the mounting bracket engages in the slot of the main
metalwork.
6) Re-initialize the game. (Refer to section 7 ‘Initialization’)