NAMCO AquaJet, Руководство оператора

Страница: 15 / 57

Page PB
5-4 Assembling the Coin Tower
1. Connect the connector and place the coin tower on to the base assembly.
2. Attach the coin tower to the base, taking care not to trap any wires, using
the nine security button head screws (M10x25), flat and spring washers.
NOTE:- Ensure that the two security screws are fitted to the inside of the
cash box area.
3. Fit the cashbox plate to the inside of the coin tower using four pozi head
screws (M4x12), spring and flat washers.
4. Place the instruction panel into the panel
support bracket and fasten to the coin
cap using the two security screws
(M5x20).
NOTE:-
When the machine is fully assembled and in
its final position, lower the 12 level adjusters, (4 on the Monitor Cabinet, 6 on
the Ride Assy and 2 on the coin tower), with a spanner so that the machine is
level and all castors are raised from the floor by approx. 5mm. Tighten the lock
nuts with a spanner to ensure that the level adjusters do not move.