Nakayama PRO MB6510, Руководство пользователя

Страница: 4 / 49

EN
Operators
• The operator must be familiar with the function of all the unit’s control elements.
• The operator must have read or received instructions for the proper and safe use of the machine.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from any moving parts. Loose clothes, jewellery and/or
long hair can be caught in moving parts.
• Do not operate the machine when tired.
• Persons meeting the following conditions must not be allowed to operate the machine:
- Persons that are under the influence of alcohol or other substances.
- Persons suffering from diseases that hinder safe operation.
- Pregnant women, minors and persons with reduced mental capacity.
Working condition
• The distance between the unit and non-operators shall not be less than 5m.
• The degree of slope of the ground shall not be more than 5°.
• The surface of the ground shall be flat, and the tillage layer shall be free of obstacles.
• The line of sight must be good.
Before operation
• Check and confirm that all the components are in good condition.
• Before starting the machine, make sure that the clutch is disengaged and that the throttle switch is in the starting position.
• Before operating the machine, install the appropriate blades for the task at hand and the depth adjuster and confirm that the equipment functions properly.
• Avoid contact with dangerous parts such as rotating parts and parts that heat up during operation.
Movement
• Before moving, run the engine without load to make sure that it operates safely.
• Make sure that the throttle and clutch are flexible, that rotating parts rotate smoothly and that the automatic return handle can return normally.
Operation
• The engine shall be switched off before removing dirt, weeds and other debris from the blades.
• When the blade enters the soil and cannot move forward, switch off the engine and unblock it manually.
Transfer
• Switch off the engine and replace the walking wheel before transferring the unit.
• When passing through the road, abide by the road traffic safety regulations and keep a safe distance from other vehicles and passersby.
• Do not carry people or objects with the machine.
Emergency inspection
In any of the following conditions, the machine should be stopped immediately for inspection:
• The blades are jammed by grass and mud.
• The engine or gearbox produce abnormal sounds.
• The engine speed rises abnormally, and the throttle control fails.
Fuel
• The unit’s fuel tank must be filled with gasoline number 95# or above.
• Don’t fill the fuel tank with the wrong type of fuel, otherwise the engine may be damaged.
TECHNICAL DATA
Model MB6510
Displacement 212 cc
Power 7 hp
Work width 58 cm
Gears 1 front, 1 reverse
Blades 12 pcs
Wheels and tires dimensions 320 mm (wheels) 4.0 - 7 (tires)
Weight 87 kg
* The manufacturer reserves the right to make minor changes to product design and technical
specifications without prior notice unless these changes significantly affect the performance and
safety of the products. The parts described / illustrated in the pages of the manual that you hold in
your hands may also concern other models of the manufacturer's product line with similar features
and may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection
or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided
equipment may cause malfunctions or even serious injury or death. The manufacturer and the
importer shall not be liable for injuries and damages resulting from the use of non-conforming
equipment.
1. Remove the whole machine from the packing box.
2. Install the walking wheel or working wheel on both ends of the output shaft of the walking gearbox and fix it with the pin shaft 8×40 and R-pin.
3. Install the blades on both ends of the output shaft of the walking gearbox and fix it with the pin shaft 8×50 and R-pin.
4. Install the support resistance rod on the fender bracket and tighten it with the pin shaft 8×50 and R-pin.
ASSEMBLY
WWW.NIKOLAOUTOOLS.COM
4