background image

 

10 

WWW

.N

AKAYAMA

T

OOLS

.

COM

 

 

away from the tool(s). 

10.

 

Do not put hands or feet near or under rotating parts. 

11.

 

Never pick up or carry a machine while the engine is running 

12.

 

Stop the engine 

----whenever you leave the machine 
----before refueling 
13.

 

Reduce the throttle setting during engine shut down and, if the engine is provided 
with a shut-off valve, turn the fuel off at the conclusion of working 

. Matters Need Attention During The Use of power tiller

 

1.

 

Pay attention to working situations and sound of each part during the work, check 
whether the connection between different parts is ok or not, loose situations are not 
allowed. If abnormalities are found, stop the machine and solve the problems. 

2.

 

A cold machine is forbidden to do heavy load work immediately after the machine 
is just started, especially for the new machines or the ones after overhaul. 

3.

 

Pay attention to checking the oil levels of the diesel engine and gear-box. Refill the 
engine oil when it is not enough 

4.

 

It is not allowed to cool the diesel engine by watering. 

5.

 

Be cautions about the machine’s tilting when farming. 

6.

 

The machine fixed with cultivating blades is forbidden to run on sandy or stony 
place. 

7.

 

After using the machine for farming, pay attention to cleaning dirt, weeds and smear 
on the surface of the machine and keep the machine clean. 

8.

 

Clean the sponge or the wire mesh in the air cleaner frequently, and change the 
engine oil. (Keep an eye on the marking on the empty air cleaner) 

. Safety Considerations

 

1.

 

Muffler is a high temperature spare part, do not touch the power tiller in work or 
out of work freshly. 

 

 

Содержание Premium Series









































Отзывы: