EN
WWW.NIKOLAOUTOOLS.GR
9
When the engine has been switched off, the cutter continues
running for several seconds therefore do not stand close to
cutting head of brush cutter until the cutter has come to a
standstill!
Maintenance
6. When the engine is running and idling. The throttle lever on handle is as above picture. First press the lock off lever and then switch the
throttle lever on, the machine will be working.
7. If use Nylon cutter, before cutting, need
bump to feed line on hardness area
8. If meet any problems, press the engine
switch, the machine will stop running. If need
stop cutting head working, release the throttle
lever.
9. If the machine is hot, the choke lever can be
adjusted to ON position directly when re start
the machine.
Before performing any maintenance or cleaning work, Always turn off the engine.
1. Do not spray the unit with water. Ingress of water may damage the engine and electrical connection.
2. Clean the unit with a cloth, hand brush, etc.
Maintenance schedule
12 hours of use
24hours of use
36hours of use
Air filter
Clean
Clean
Replace
Spark plug
Check
Clean
Replace
Expert inspection is required:
a) If the brush cutter strikes an object.
b) If the motor stops suddenly
c) If the blade is bent (do not align!)
d) If the gears are damaged.
Replacing and resharpening the cutting blade at the end of the mowing season always resharpen the cutting blade or, if required, replace the cutting blade
with a new one. Always have the cutting blade resharpened or replaced by a Service center (measurement of imbalance).
Содержание PB6210
Страница 1: ...WWW NIKOLAOUTOOLS GR ART NO FR RO el SL EN IT BG PB6210 PB6310 024255 024248 2 2 ...
Страница 2: ...WWW NIKOLAOUTOOLS GR 2 1 3 4 5 6 2 2 7 8 ...
Страница 3: ...WWW NIKOLAOUTOOLS GR 3 9 10 11 12 13 14 16 17 18 19 15 ...
Страница 59: ......