Nakayama PB6210, Руководство пользователя

Страница: 5 / 59

EN
WWW.NIKOLAOUTOOLS.GR
5
Description of main parts
Additional safety warnings
- In this case, do not tilt it more than absolutely necessary and lift only the part which is away from the operator. Always ensure that both hands are in the
operating position before returning the appliance to the ground.
- Do not put hands or feet near or under rotating parts.
- Never pick up or carry an appliance while the motor is running.
4) Maintenance and storage
- Keep all nuts, bolts, and screws tight to be sure the appliance is in safe working condition.
- Check the grass catcher frequently for wear or deterioration.
- Replace worn or damaged parts for safety.
For rotary mowers, ensure that only replacement cutting means of the right type are used.
- Never store the equipment with petrol in the tank inside a building where fumes can reach an open flame or spark;
- Allow the engine to cool before storing in any enclosure;
- To reduce the fire hazard, keep the engine, silencer and petrol storage area free of grass, leaves, or excessive grease;
- If the fuel tank has to be drained, this should be done outdoors.
1. Grip the handles of the brush cutter firmly with both hands. If you suspend the work, Place the throttle into the idling position.
2. Always be sure to maintain a steady, even posture while working.
3. Maintain the speed of the engine at the level required to perform cutting work and never raise the speed of the engine above the level necessary.
4. If grass gets caught in the blade during operation , or if you need to check the unit of refuel the tank always be sure to turn off the engine.
5. If the blade touches a hard object like a stone immediately stop the engine and check it something is wrong with the blade. If so,replace the blade by new
one.
6. If someone calls out while working , always be sure to turn off the engine before turning around.
7. Never touch the spark plug or plug cord while the engine is in operation .Doing so may result in being subjected to an electrical shock .
8. Never touch the muffler ,spark plug or other metallic parts of the engine while the engine is in operation or immediately after shutting down the engine.
Doing so may result in serious burns .
9. When you finish cutting in one location and wish to continue work in another spot, turn off the engine and turn the until as the blade faces away from your
body.
10. Check the cutting attachment stop turning under the engine idle before start to use the machine.
A
1
2
3
4
5
6 7
8
9 10
20
19
18
17 15 16
23 22 21
13
11
12
14