Nakayama PB6210 Скачать руководство пользователя страница 6

Страница: 6 / 59

WWW.NIKOLAOUTOOLS.GR

Component list (picture A)

Intended use

Assembly

Technical data

Displacement:

62cc

Power:

3hp

Shaft diameter:

28mm

Handle type:

Bicycle handle

Belt type:

Double

Cutting diameter:

255mm (brush cutter) 440mm (grass

trimmer)

* The manufacturer reserves the right to make minor changes

to product design and technical specifications without prior no

tice unless these changes significantly affect the performance

and safety of the products. The parts described / illustrated in

the pages of the manual that you hold in your hands may also

concern other models of the manufacturer’s product line with

similar features and may not be included in the product you just

acquired.

* To ensure the safety and reliability of the product and the war

ranty validity, all repairs, inspection, repair or replacement work,

including maintenance and special adjustments, must only be

carried out by technicians of the authorized service department

of the manufacturer.

* Always use the product with the supplied equipment. Oper

ation of the product with non-provided equipment may cause

malfunctions or even serious injury or death. The manufacturer

and the importer shall not be liable for injuries and damages re

sulting from the use of non-conforming equipment.

This brush cutter has been designed for cutting grass. Any other use is not permitted.

The brush cutter is suitable for private use in the garden only, brush cutter for private use are those which are used for cutting grass in the garden, however not

for cutting grass in public parks, playing fields or on farms or in forest.

Non-permitted users:

Persons who are not familiar with the operating manual, children, young people under the age of 16 as well as persons under the influence of alcohol, drugs

or medication must not operate the unit.

Working hours for gasoline brush cutters.

While it is permitted to use a brush cutter at any time, operators should always show due consideration to others living nearby.

1. Connecting the aluminum shaft to the motor (pictures 1 and 2).

1.1 Align the four screw holes on the shaft reducer and on the side of the four brush cutter motor housing screw hole and insert the screws into the hex

wrench holes (as shown in pictures 1 and 2).

2. Installing the handle (pictures 3 - 6).

2.1 Remove the staple handle and staple plate.

2.2 Place the handle shaft on the bracket handle, then clamp plate and staple handle back on the handle shaft and tighten the staple handle so that firmly

secure the handle.

3. Installing the plastic cover (pictures 7 and 8).

3.1 Align the two screw holes on the board with the screw holes on the plastic board.

3.2 Insert the two combination screws into the screw holes and tighten them securely with the Allen key shut, then finish the installation.

4. Assembling the cutting head.

4.1 Release the nut (pictures 9 and 10). Line up the two holes of flange and shield, use one screw driver to hold the flange as below and turn the socket

wrench clockwise, the nut will be released.

1 Left handle

2 Right handle

3 Throttle lever

4 Lock OFF lever

5 Engine switch

6 Safe guard

7 Blade

8 Nylon cutter

9 Fuel bottle

10 Screw driver

11 Inner flange