NAIM N-VI, Руководство пользователя

Страница: 24 / 28

E22
n-Vi
System Connections
cable
direction
marker
12 System Connections
Connection of the n-Vi in a stand-alone AV system
is straightforward. Each speaker output should
be connected to the appropriate speaker, the
subwoofer output connected to an active subwoofer
and a video display connected to the appropriate
video output. (See Diagram 5.7).
Integration of the n-Vi in an existing Naim system requires
a little more care and thought however. The diagram below
shows an n-Vi integrated in a system comprising a NAC252
preamplifier, Supercap power supply and NAP250 power
amplifier. The principles applied in this connection scheme are
similarly appropriate in any alternative systems but, if there
is any doubt, your local retailer or distributor will be able to
advise.
Note: The preamplifier input must be set to unity gain mode. See
the preamplifier Owner’s Manual for further information.
12.1 n-Vi with NAC252, Supercap and NAP250
mains input
and fuse
mains input
and fuse
mains input
and fuse
Centre, left surround and
right surround speakers
To subwoofer
180° 5-pin DIN
270° 5-pin DIN NAC 252 Burndy
Right front speaker Left front speaker
4-pin DIN to XLR