NAIM N-VI Скачать руководство пользователя страница 13

Страница: 13 / 28

E11

n-Vi

On Screen Setup

75% Colour Scale Test
Pattern

The display must be viewed
using a 47b blue separation
filter. Adjust the display’s
colour and tint/hue control
until the four large boxes (1, 2, 3 and 4) appear the same
shade of blue.

7.3.5 Lip Sync (Audio/Video delay)

DVD video and audio can sometimes appear to be a little out of
synchronisation.

Lip Sync

provides adjustment in 10mS steps

to compensate for any apparent error. Use the handset

key

to delay the audio and

key to delay the video.

Note:

The default value for lip sync is -10 which ensures correct

audio/video synchronisation on the DVI and BNC video outputs. For
correct synchronisation with interlaced video outputs (SCART and
S-Video) lip sync should be set to 0.

7.3.6 Aspect Ratio

Sets the player to output video appropriate to the display.
For 16:9 (widescreen) displays, non-widescreen programme
material will be accommodated by leaving a proportion of the
display either side of the picture unused. Widescreen material
on 4:3 (conventional) displays can be accommodated by
selecting either the

pan-scan

letter box

options. The

pan-

scan

option uses the full height of the display but dynamically

pans the material to ensure that the important information is
always displayed. The

letter box

option displays the material’s

full width but leaves a proportion of the display above and
below the picture unused.

7.3.7 Video Outputs Off

Enables unused video sockets to be selectively switched off
during playback. Switching off the video sockets will improve
sound quality of audio CD and DVD-A material.

Note:

All video outputs will operate when player is in stop mode or

when the OSD menu is displayed.

7.4 Progressive Scan Setup

Selection of

Progressive Scan Video Setup

from the top level

menu generates a second level menu described and illustrated
below.

The

Progressive Scan Output

menus enable selection of the

signal format to be output from the player’s

BNC

sockets.

The signals available from the BNC sockets provide improved
quality over the SCART and S-Video outputs.

7.4.1 Colour Format

The

Colour Format

sub-menu enables selection of the video

signal

Colour Format

(RGB, YPbPr).

Note:

YPbPr is the appropriate selection for most programme

material. Video colour formats are explained in Section 10.

7.4.2 Picture Adjust

Three separate

Picture Adjust

sub-menus are available. One for

adjustment of the player’s

Progressive Scan RGB

output, one

for adjustment of the player’s

Progressive Scan

YPbPr (YUV)

output and one that is common to both.

Each signal channel of the

RGB

outputs can be independently

adjusted. For example, to emphasise red, green or blue tones
in an

RGB

picture boost the R, G or B channels respectively.

YPbPr

adjustment covers luminance and saturation only.

The picture adjustments common to

Progressive Scan

outputs

are

Vertical Offset

Horizontal Offset

and

YC Delay

The

Offset

adjustments enable the picture to be properly

centred in the display screen.

YC Delay

adjustment provides compensation for the timing

errors that can occur between the colour and brightness
elements of a video signal. YC Delay is best left at its default
adjustment unless picture abnormalities that cannot be
corrected by any other means are apparent.

Note:

Offset and YC Delay adjustment made from this menu will

also be reflected in the DVI output.

Note:

No picture adjustment is available on the player’s SCART

and S-Video outputs.

DVD playback
system setup

video setup

prog. scan setup
audio setup
speaker setup
parental control
exit menu

output format
black level
SCART settings
test patterns
lip sync

aspect ratio

video outputs off