NAIM N-VI, Руководство пользователя

Страница: 17 / 28

E15
n-Vi
Front Panel Setup
8.3 Miscellaneous Setup
Select Other Settings from the main menu to enter the other
settings menu.
The other settings menu provides access to two further display
interface options -
OSD Volume Bar
and
OSD Decode Info
.
Selecting OSD Volume Bar switches on a temporary status bar
indication of volume on the display screen.
Selecting OSD Decode Info switches on a temporary status
bar indication of the audio-visual decode mode on the display
screen.
Return to the previous menu after each selection and then
back to the main menu when each option is set.
8.4 Clock Setup
Note: Clock functions are only available if the FM/DAB tuner
module is fitted.
Select Clock from the Main menu to enter the clock menu.
The n-Vi internal clock can be set manually or take its time
automatically from the digital radio signal.
To set the clock manually select
Set Time
from the Clock menu
and use the navigation keys to select and adjust the date, day,
hours and minutes.
To set the time using the DAB signal select Set Time from the
Clock menu and Use DAB Clock then use the navigation keys
to select Yes or No .
Return to the previous menu after each selection and then
back to the main menu when the clock options are set.
8.5 Alarm Setup
Note:
Alarm functions are only available if the FM/DAB tuner
module is fitted.
Select Alarm from the Main menu to enter the alarm setup
routine.
The alarm function switches the n-Vi out of standby mode
and selects a signal source at a specified time. Five different
alarm points can be set, as can alarm
Frequency (Daily, Day,
Weekdays, Weekends), Source , On Time , Off Time , Volume ,
Volume Ramp
and
Ramp Rate
. Use the
navigation
keys to
select the required alarm (1 to 5), the required options for each
one and finally to select
On or Off .
Note:
An alarm symbol will show in the n-Vi front panel display at
all times while an alarm is set.
8.6 Exit Front Panel Setup
Setting the Alarm options completes Front Panel Setup. Use the
clr (clear) key, or press setup to exit Front Panel Setup.