NAD VISO TWO Скачать руководство пользователя страница 31

LOADING CODE LIBRARIES

The HTR 6 can store a different library of default NAD codes for each of its 
Device Selector “pages.” If the original default library does not control your 
NAD CD player, DVD player, or other component, follow the procedure 
below to change the code-library.

Begin by ensuring that the component you wish the HTR 6 to control is 
plugged in and powered-up (“on,” not merely in standby). To enter the 
HTR 6’s Library Mode, simultaneously press-and-hold for 3 seconds both the 
desired Device Selector key and the [PROGRAM] key, until the Learn LED 
turns green. 

While keeping the HTR 6 pointed toward the component, enter the first 
appropriate three-digit code-library number from the table below. Press 
[OFF]. If the component turns off, press [ENTER] to accept that code-library 
number and exit the Library Mode. If the component does not turn off, 
enter the next three-digit code-library number from the table. 

When you enter the correct number the component will turn off; press 
[ENTER] to accept that code library number and exit the Library Mode.

LIBRARY CODE

NAD PRODUCT 

DESCRIPTION

LIBRARY CODE

NAD PRODUCT 

DESCRIPTION

100

Receiver/Processor 

(Discrete ON/OFF)

301

L75, L76 Tuner

101

Receiver/Processor 

(Toggle ON/OFF)

302

L70 Tuner

102

S170

303

L53 Tuner

103

L75

304

L73 Tuner

104

Second Zone Commands

305

C425

105

L70

306

C445

106

L76

307

Txx5 Series Tuner

107

118

400

Tape Deck B

108

L53

401

TAPE Deck A

109

L73

500

TV 280

110

Stereo Receiver/

Amplifier

501

MR13

111

Stereo Second Zone

502

MR20

112

Txx5 Series

503

PMR45

200

CD Player

600

T535, T562, T585, M55

201

CD Player (old)

601

T550, L55

202

5170, 5240, 5340

602

T512, T531, T532, T571, 

T572

203

5325

603

L70, L73 DVD

204

5060

604

L56

205

M5

605

T513, T514, T515, T524, 

T533, T534

300

Tuner

606

L53 DVD

SEARCH MODE

If none of the codes from the table, when entered, turns on the 
component, and if you are quite sure you have followed the above 
procedure completely and carefully, you may want to try the “search” 
method as follows:

Enter Library Mode by simultaneously pressing-and-holding for 3 seconds 
both the desired Device Selector key and the [PROGRAM] button until the 
Learn LED turns green. Now press-and-hold the HTR 6’s [ 

 ]) key; the 

remote will step through all the available codes at a rate of approximately 
1 per second. 

When the component turns off, immediately release the cursor key; press 
[ENTER] to accept that code-library and exit the Library Mode. Try a few 
commands; should you prove to have stepped past the needed code-
library, re-enter the Library Mode and use the cursor key to step back to it.

NOTE

 

It is possible that search mode will find code-libraries that operate, at 
least partially, some other brand (non-NAD) components. You may 
certainly exploit such capabilities as you find them. However, since we 
can only ensure the completeness or accuracy of NAD code-libraries, we 
cannot support the HTR 6’s operation with other-brand components.

CHECKING CODE-LIBRARY NUMBER

You can check the current code-library on any Device Selector key as 
follows. Enter Library Mode by simultaneously pressing-and-holding for 
3 seconds both the desired component’s Device Selector key and the 
[PROGRAM] key until the Learn LED turns green. Press the [DISP] key; the 
HTR 6 indicates the current code-library by flashing its [CUSTOM], [VCR], 
and [MACRO] keys. 

For example, to indicate code-library #501, the HTR 6 will flash [CUSTOM] 5 
times, pause, and then flash [MACRO] once. You might wish to make a note 
of your components’ code-library numbers.

Summary of the HTR 6 Modes

Mode

Keys To Press (for 3 seconds)

Learn/Copy/Punch Through

Device Key + [   ] Key

Delete Mode

Device Key + RTN Key

Macro Record

Macro Key + Function Key

Library Mode

Device Key + Program Key

Back Light Timeout

DISP Key + Digit Key

Factory Reset

See “Factory Reset” above

SLEEP MODE

The Sleep Mode timer will switch the VISO TWO to Standby mode 
automatically after a preset number of minutes. Pressing the HTR 6’s SLEEP 
button once will display the setting of the sleep time increment.  Pressing 
the HTR 6’s SLEEP button a second time within a 3-second period will 
change the sleep time increment in 30-minute intervals, after which time 
the VISO TWO will automatically switch into Standby mode.  

To adjust the sleep delay, press the HTR 6’s SLEEP button twice; first to 
display the sleep time increment, and a second time to change the 
sleep time increment.  The sleep time increment and a “SLEEP” icon will 
continuously display on the VISO TWO’s front panel Vacuum Fluorescent 
Display (VFD). Each consecutive press increases the sleep time in 30-minute 
increments from 30 to 90 minutes. To cancel the sleep mode, continue 
pressing the HTR 6’s SLEEP button until “Sleep Off” displays on the VFD.  
Switching the VISO TWO to standby from either the HTR 6’s OFF or the 
VISO TWO’s POWER button will also cancel the sleep mode

NOTE

 

In order to use SLEEP button, make sure that HTR 6’s DEVICE SELECTOR 
page is set to “AMP”.

OPERATION

uSing the htr 6 remote control

1

EN

G

LI

SH

FR

ANÇ

AIS

ESP

AÑOL

IT

ALIANO

DEUT

SCH

NEDERL

ANDS

SVENSK

A

РУ

ССКИЙ

Содержание VISO TWO



































Отзывы: