DAB OPERATION
With the separately sold NAD DAB Adaptor DB1 already connected to the
VISO TWO, you can now carry out the VISO TWO to receive DAB broadcasts.
1
Toggle [AM/FM/DB] button until DAB mode. When DAB mode is selected,
VFD will show “DAB initialize – Please wait” and then go to “Full Scan” mode.
FULL SCAN will enable the scanning of the full range of digital frequencies
(Band III and L-Band). This sequence cannot be interrupted.
The arrows show the progress of the sequence. When scanning is
completed, the last number shown on the upper right side of the VFD
corresponds to the total number of DAB broadcast stations found. Then,
the first station is tuned in (See “ALPHANUMERIC” description below to
understand the order or arrangement of stations).
2
The strength of the incoming signal can be shown on the VFD by
pressing the [ENTER] button. The more “o” segments visible in the lower
display line, the stronger the signal. By changing the position of the
antenna, you can increase the signal strength. Consult an antenna
professional for more information.
NOTES
• “No stations Available” will be shown in the VFD when no DAB stations
are found after the scanning process. If this occurs, check the connection
and position of the DAB antenna or call your local DAB broadcast
providers for coverage information.
• When using HTR 6 buttons to navigate DAB options, ensure that the
“DEVICE SELECTOR” setting of your HTR 6 is set to “TUNER”.
SERVICE LIST
Follow the steps below to select through the DAB service stations found.
1
At DAB mode, press [TUNE
/
] to step through the list of
available stations as shown in the lower display line of the VFD.
2
Press [ENTER] to select the desired station.
DAB TUNER MODE
Aside from “Full Scan” as already described above, pressing the [MENU]
button will also present you with other options namely - Local Scan, Preset
Tune, Station Order, Tune Aid, Dynamic Range and Prune List
LOCAL SCAN
LOCAL SCAN performs local scanning of available DAB services in your area.
Check with your dealer or visit www.WorldDAB.org to check the applicable
digital transmission frequencies in your area.
1
While listening to a DAB broadcast, press front panel’s [MENU] button
and then [TUNE
/
] to select “Local scan”. Press [ENTER].
2
Local scan of available DAB services in your area will start. The arrows
show the progress of the sequence. When scanning is completed, the
last number shown on the right side of the VFD corresponds to the total
number of DAB broadcast stations found. Then, the first station is tuned in.
PRESET TUNE
Use this option to select a DAB preset station.
1
While listening to a DAB broadcast, press front panel’s [MENU] button
and then [TUNE
/
] to select “Preset tune”. Press [ENTER].
2
Press [TUNE
/
] to step up or down between presets. Note that
Presets must have been previously stored.
3
Press [ENTER] to select desired preset number.
Setting dab preSetS
The VISO TWO can store as many as 99 DAB stations of your favorite DAB
broadcast for immediate recall.
1
To store a DAB preset, first tune the DAB broadcast, and then press the
front panel [MEMORY] button. The VFD will show a “Preset Memory”
and the next available vacant Preset number (the number is blinking).
2
Press [MEMORY] button again to store the desired DAB broadcast on
the Preset number shown or use the [TUNE
/
] keys to select
another available Preset number.
3
Then, press [MEMORY] key button again. Your desired DAB broadcast is
now stored in the assigned presets.
STATION ORDER
Use “Station order” to sort the sequence of the listed stations. There are four
orders – Alphanumeric, Active, Ensemble and Favourite.
1
While listening to a DAB broadcast, press front panel’s [MENU] button
and then [TUNE
/
] to select “Station Order”. Press [ENTER].
2
Toggle [TUNE
/
] to select through “Alphanumeric”, “Active”,
“Ensemble” and “Favourite”.
3
Press [ENTER] to select desired station order.
alphanumeric
This is the default setting. Stations are arranged by numbers first and then
alphabetically by letters.
active
Active stations are listed at the top of the channel list. Those channels
that are in list but have no service in the area will be displayed last in the
channel list.
enSemble
Digital radio is broadcast as groups of data called ensemble. Each ensemble
contains a number of stations, transmitted at a set frequency. When
“Ensemble” is selected as the mode of station order, the radio stations are
arranged in the order of their ensemble names.
NOTE
Ensemble is also interchangeably termed as “multiplex” by other
broadcast providers.
favourite
The VISO TWO memorizes the top ten stations you listen as you tune in
stations. They will be listed at the top of the channel list.
OPERATION
uSing the viSo two - am/fm/db/ipod
EN
G
LIS
H
FR
A
N
Ç
A
IS
ES
PA
Ñ
O
L
IT
A
LIA
N
O
D
EU
TS
CH
N
ED
ER
LA
N
D
S
SV
EN
SK
A
РУ
СС
К
И
Й
