ENGLISH
MENU OPTIONS
Sources
Select preferred Source to access or playback contents
Presets
Use BluOS App to program into Presets your favorite radio stations, music
streams, playlists or Sources
Settings
Configure or display M10 V2 settings
Player
1 Sleep Timer:
Stop playback after a set amount of time via gentle
volume decline
2 Room Name:
Create a customized room name for the M10 V2
using the pop up keyboard
3 Tone Controls:
Swipe to boost or reduce Bass and Treble response.
Tone Control levels, Bass and Treble, can be turned ON/OFF or Reset.
4 Select attached speakers:
Select corresponding option
depending upon the subwoofer connected - 1 Subwoofer (connect
to SUBW OUT 1 only), 2 Subwoofers or No Subwoofer
5 Crossover:
The subwoofer will reproduce only low frequency
information below the selected crossover setting.
6 LCD Brightness:
Adjust LCD brightness level
7 Indicator Brightness:
Change NAD logo indicator brightness to
Normal, Dim or Off
8 Dark Mode:
Background of Front View display for particular source
is either dark (enabled) or bright (disabled)
9 Amplifier Standby:
Maintain network connection at standby
mode when enabled
10 Bluetooth:
Set Bluetooth connection to Manual, Automatic, Guest
or Disabled Bluetooth availability
11 Volume limits (dB):
Set volume range from lowest to highest level
in dB units
12 LCD Temporary Display:
Enabled mode will turn off display
temporarily after 1 minute of non-user interface. Disabled mode will
keep display shown.
13 Volume In Percent:
Volume level is displayed in percent when
enabled. At disabled mode, volume level is displayed in dB.
IDENTIFICATION OF CONTROLS
TOP AND FRONT VIEW
9
8
11
5
9
12
6
1
2
3
4
10
13
7
