ENGLISH
OVERVIEW OF THE HTR 10
•
Controls up to 5 devices.
•
Pre-programmed with all NAD remote commands
•
Learns up to 220 commands
•
Records up to 48 macros with a maximum of 64 commands each
•
Configurable punch-through
•
Key illumination with programmable timeout
•
Upgradable
•
Contains pre-programmed library of NAD remote codes
The NAD HTR 10 is ready to operate compatible NAD components right
out of the box, but it is really five remote controls in one. Each of the 5
DEVICE SELECTOR keys at the top of the handset can call up a new “page”
of remote control codes to be transmitted by the remaining keys. You may
“teach” codes from any infrared-remote controlled component, regardless
of brand, to any or all these keys.
Obviously, the most logical system is that you teach the codes from your
AMP player to the [AMP] DEVICE SELECTOR “page,” your television’s codes
to the [TV] “page” and so on, but there is no required scheme: You may
load any commands to any key on any page (see “LEARNING CODES FROM
OTHER REMOTES” below).
The HTR 10 is already pre-programmed with a full complement of NAD
receiver commands on its [AMP] DEVICE SELECTOR page as well as BluOS
commands on its [BLS] DEVICE SELECTOR. All function keys on the [AMP]
DEVICE SELECTOR “page” is pre-programmed to control NAD amplifiers,
preamplifiers, and receivers.
These default commands are permanent. Even if you teach the HTR 10 new
commands to take their place, the underlying library commands remain
in place and can easily be recalled should you add a compatible NAD
component to your system later (see “DELETE MODE” below).
Library commands to operate other applicable NAD-brand Amplifier, DVD,
BD, CD or Tuner devices can also be programmed to any of the DEVICE
SELECTOR keys.
GETTING FAMILIAR WITH THE HTR 10
The HTR 10 is divided into two main sections. Five DEVICE SELECTOR keys
at the top, [AMP], [TV], [BLS], [STB] and [AUX], set the handset’s remaining
keys to a “page” of commands to control a particular component. A
DEVICE SELECTOR key determines only what component the HTR 10
will command; it does not perform any function on the component. All
the remaining keys are function keys that can “learn” control codes from
virtually any infrared remote controller, allowing you to teach the codes of
your equipment, regardless of brand, to the HTR 10.
DESCRIPTION OF KEY FUNCTIONS
1
2
3
4
5
6
7
2
BLS
CH
AV
PRESET
PRESET / INPUT
IN 1
IN 2
IN 3
IN 4
IN 5
IN 6
IN 7
IN 8
IN 9
TEST
IN 0
+10
MENU NAVIGATION
TRANSPORT
EQ
CENT
SUB
SURR
HGT
HTR 10
DEVICE SELECTOR
CHANNEL VOLUME
INFO
VOL
SURR
MODE
TV
AMP
MACRO
AUX
STB
