Nacra 500 MK2, Инструкция по сборке

Страница: 15 / 112

15.
1.3.
Trampoline track on hull
1x 1x
6mm
3mm
2.
Make sure the trampoline is centered
5.
Ideally with two persons, slowly and evenly pull the sides
into the tracks on the hulls.
Check if the trampoline does not get stuck at the
front edge of the track. Pulling hard when this
happens can damage your trampoline.
1.
Slide the front of the trampoline into the track of the
front beam. The front top has a pocket opening in the
middle. Check if the top points up.
Pulling the trampoline in can be heavy, this becomes easier
over time when the trampoline stretches a bit. You can use
soap on the sides of the trampoline to lubricate.
Rear lace line
3.
Loosen all crossbar bolts.
4.
Use dishwasher soap to lubricate the sides of the
trampoline.
Tools needed:
- Torque wrench
- 5/16 or 8 mm hex socket
- Dishwasher soap