13
10
5
0
15
Mark
Hex wrench
(3 mm)
4-1-1
Adjusting the Hydraulic Resistance
Inserting a hex wrench obliquely upward into the hydraulic resistance
adjusting plug, turn it to change hydraulic resistance.
・Clockwise (Scale readings become small.):
Hydraulic resistance becomes higher at the stance phase.
・Counterclockwise (Scale readings become large.):
Hydraulic resistance becomes lower at the stance phase.
Adjust by using scale readings as a guide. Read the scale at the mark on the
window.
Fig. 11 How to Adjust Hydraulic Resistance
Adjusting scale as viewed
through the window (for 10)
The adjusting plugs have been set to the positions which are common
to most people in the factory default setting.
When you can not find suitable positions, turn the plugs to their
original position.
Hydraulic resistance adjusting plug: Set to the scale 10.
Hydraulic sensitivity adjusting plug: Set to the scale 15.
IMPORTANT
A
B
