25
Battery connector
Circuit board connector
Battery case
Outer clamp
Inner clamp
Retaining screw
● Replace the battery in the following procedure:
6-2
Replacing the Battery
Be sure to eliminate static electricity by, for example, touching a desk before
starting this work.
Fig.20 Removing the Battery Connector
Fig.21 Removing the Clamps
1
Remove the battery connector from the circuit board (Fig. 20).
2
Loosening the outer clamp bolts, pull out the tube.
3
Removing the outer clamp from the frame, remove the retaining screw
and pull out the inner clamp together with the
battery case (Fig. 21).
CAUTION
Note: See next page
8
.
