17
EN
3. Pull the fat collecting tray (
6
) out of the
bottom of the housing and empty it.
4. Clean the grill plates and the fat col-
lecting tray with a little detergent and
warm water or in the dishwasher.
To ensure a particularly long useful
life, we recommend cleaning the
grill plates with a sponge and a
little detergent.
5. Wipe down the housing with a damp
cloth.
6. Then dry off the device with a soft cloth.
7. Close the device and
fi
x the grill plates
with the locking catch (
2
).
8. Store the device in a dry, clean, frost-
free place so that it is out of the reach
of children and animals.
DISPOSAL
Dispose of the packaging material
in an environmentally friendly man-
ner so that it can be recycled.
This device is governed by the
European Directive 2012/19/EU
on waste electrical and electronic
equipment (WEEE). Do not dispose
of this device as normal domestic
waste, but rather in an environmen-
tally friendly manner via an o
ffi
cially
approved waste disposal company.
TROUBLESHOOTING
If the device does not work properly, check
whether you are able to rectify the problem
yourself. If the problem cannot be solved
with the steps below, contact the custom-
er service department.
Do not attempt to repair an electri-
cal device yourself!
The device does not work.
The plug socket is defective.
►
Try another plug socket.
There is no mains voltage.
►
Check the fuse of the mains connec-
tion.
The fuse in the fuse box is triggered.
Too many devices connected to the same
circuit.
►
Reduce the number of devices in the
circuit.
The device switches off during the
grilling process.
The device was opened for quite a long
time in order for example to test how well
cooked the food is.
►
Make sure that the device is not
opened for too long as it has an auto-
matic safety shutoff.
TECHNICAL DATA
Article number:
09595
Model number:
HRG1026
Power supply:
220
–
240 V ~ 50
–
60 Hz
Power:
max. 2000 W
Protection class:
I
ID of operating instructions: Z 09595 M N8W V1 0720 uh
All rights reserved.
