28
The thickness of a new tool is 29 mm.
You must bear in mind that the tool is conical. Therefore, even if the tool is padded correctly,
the machine will not be able to achieve the maximum possible bevel (15 mm hypotenuse)
with a mill at the end of its lifetime. This fact is also apparent on the graduated scale for
setting the lower cylinders; this scale may not correspond to the bevel created.
ATTENTION:
The tool padding (added to the current mill thickness) must not exceed
29 mm.
In such case, the machine will not work correctly and may be damaged.
ATTENTION:
Under the cutter you can see also a base washer (see Exploded position
4011). This washer is unique and different for each machine. If for some reason you lose or
damage this washer, for new one, inform us about its precise thickness. This information can
be found on the nameplate behind the serial number. In the case of using incorrect washer, the
machine will not work correctly.
Содержание UZ 15 Rapid
