N.KO UZ 15 Rapid, Инструкция по эксплуатации и техническому обслуживанию

Страница: 21 / 43

21
Bevel cutting
Important:
Activities described in this paragraph must only be done after the adjustment according
to the previous paragraphs.
To ensure correct operation of the machine, it is important to check whether the settings are
correct. None of the illustrated situations can occur: the location of the work piece machined
in relation to the lower and holder cylinders must be as illustrated in situations 1 and 4 in
Fig. 5.4.1.
Fig. 5.4.1