N.KO UZ 15 Rapid, Инструкция по эксплуатации и техническому обслуживанию, Страница: 26 / 43

26
6.3
Recommended transmission oils
6.4
Exchange of tools
Attention:
Wear protective gloves when exchanging tools.
When exchanging worn tools, proceed as follows:
- Dismount the protective acrylic glass.
- Dismount the upper thrust bar (two screws, position A, Fig. 6.4.1).
- Loosen the main central roller and let the lower rest down to its lowest position.
- Loosen the screw securing the tool (position B, Fig. 6.4.1) and remove the tool from
the shaft. If the tool cannot be dismounted easily, use a two-handed extractor.
- Mount a new cutting tool (position C, Fig. 6.4.1) and retighten the securing screw
(position B, Fig. 6.4.1).
- Remount the upper thrust bar (two screws, position A, Fig. 6.4.1) and the protective
acrylic glass.