Myryad MDV 300, Руководство пользователя

Страница: 9 / 36

TROUBLESHOOTING
28
Symptom Check and Action
Cannot SKIP
or SCAN
Some discs are programmed to prevent users using SKIP or SCAN
at some sections, especially at the beginning WARNING section.
SKIP does not work with single Chapter discs.
No sound or
poor quality
sound
Check that the TV and Amplifier have been switched on, and correctly set.
Check that the TV and Amplifier are correctly connected..
Press AUDIO button to select an alternative audio track.
Check that the MUTE function of the TV or Amplifier is not active
There will be no sound output during REVERSE PLAY / PAUSE / STEP /
SLOW and SCAN.
DTS discs used and no sound from TV.
Select an alternative audio track by pressing the remote control
"AUDIO" button, or by using setup in the disc menu.
Connect the digital audio output to a digital amplifier (or pre-amplifier
such as, for example, a Myryad MDP 500 G6 Pre-amplifier Processor).
No surround
sound If digital output has been activated:
Press SETUP button
Highlight "AUDIO"
Highlight "DIGITAL OUTPUT"
Select BITSTREAM or LPCM
Press SETUP button
Check that the amplifier or active type loudspeakers are switched on..
MP3 disc no
sound or noisy
Remote control
does not function
When PC program files or other data files are mixed with
MP3 files on the same disc, the player may play the non-MP3
files with noise or no sound.
Check the disc, if all the files on disc are MP3 files
Skip the file, try other files.
Remove the obstacles between the remote control and the player.
Point the remote control towards the remote sensor on the player.
Check that the batteries of the remote control have been loaded
correctly.
Replace the remote control batteries.
CAUTION
: To reduce the risk of fire and electric
shock, do not remove the cover (or back) of the unit. Refer
servicing only to qualified service personnel.
RISK OF ELECTRIC SHOCK
DONOT OPEN
CAUTION