Myryad MDV 300, Руководство пользователя

Страница: 8 / 36

TROUBLESHOOTING
Should your DVD player develop a problem, please check below before
requesting service:
Symptom Check and Action
No Power Check that the power cord has been properly connected to the power outlet.
Check that power has been switched on at the socket and on the rear panel.
Does not play No disc, load a disc.
Disc has been loaded upside down. Place the disc with the label side up.
Disc's region code does not match that of the player.
Disc is not of the correct type for the player.
Disc is damaged or dirty, clean the disc or try another disc.
Moisture may be condensed inside the player. Remove the disc and
leave the unit power on for one or two hours.
No Picture
Check that the TV set has power, use TV remote to select A/V signal for
DVD rather than broadcast.
Connect Composite (CVBS) video cable and check Video Setup menu
(See Video Outputs, page 1)
Check that the system is properly and securely connected.
Check that connection cables are not damaged.
Clean the disc.
Picture
noise / distorted The disc is dirty or damaged. Clean the disc or try another disc.
Check the colour system of the player and the TV set.
Connect the player directly to the TV set instead of via other components,
such as a VCR.
Picture not full
screen
Select the screen format from the player's SETUP MENU,
see "
" in this manual.
Select the screen format from DVD disc menu.
SETUP MENU
Malfunction Should the player develop a malfunction, unplug the player for
30 minutes. After 30 minutes, power on the player and the restore
function should reset the player.
27