©
2018 mPTech
. All rights reserved.
PRIME 18x9 3G
8
cover.
Use only memory cards recommended by the manufacturer. Pay attention to the
selection of the proper format-the microSD card, capacity and type / class.
Incompatible memory cards may damage the device and cause the stored data to be
destroyed as well. Incompatibility of memory card can be caused, among others, by
an incorrect card format (required format microSD) or an unsupported card capacity.
6.2 Charging the battery
Charge the battery before the first use. The battery should be charged by the attached
charger or another charger, intended for this type of equipment. If in doubt contact
the seller or manufacturer service. Use only chargers and wires recommended by the
manufacturer. Using incompatible chargers or cables can cause explosion of the
battery or damage to your device. When the battery is near a complete discharge, the
notification is displayed on a low battery charge. To continue use of the device charge
the battery. If the battery is completely discharged the device can not be switched on
even when the loading process is ongoing. Before the device can be turned on again,
the battery has to be charged for at least a few minutes. In case of any problems with
the battery or if in need of a replacement, the device should be delivered to the
manufacturer's service center.
To charge the battery, connect the microUSB plug to the socket in the device and the
USB plug to the charger.
Incorrect charger connection (USB cable) can cause damage to the AC adapter
or the device. The damages resulting from improper handling are not covered by
the warranty.
Plug the charger into the wall socket. When charging starts, the battery icon will
become a lightning flash in the top right corner of the screen, and when the device is
turned off, a graphics showing the battery charge level should appear.
The device can heat up during charging. It is a regular occurrence and should
not affect the stability or performance of the device.
When the charge reaches 100% it means that the battery is fully charged, finish the
charging. rUnplug the charger from the from the wall socket and from the smart phone.
If the phone does not charge properly deliver it (with the charger) to a service
center of the manufacturer.
