System Board
Section 1
Troubleshooting
P.
S.
P.
S.
P.
S.
P.
S.
The system’s
ports do not work.
Confirm the CMOS setup has been correctly
configured;
c h e c k t h e r i b b o n c a b l e
installation.
Ethernet adapter does not work.
Most ethernet cards use
as a default
setting. The MVE486 uses
for the COM2
serial port. Either disable COM2 or change
the ethernet adapter settings,
Serial ports will not properly run a serial
mouse.
Make sure the power supply has adequate
12 volt supply being delivered to the
system board.
OS/2 will not print from the parallel port.
OS/2 requires the
for the parallel port to
be active. Make sure the parallel port(s) have
the
line correctly configured.
3 - 2
Version DO1
Copyright 1993
