Installation
Section 1
System Board
Finishing Hardware
Once the system board has been mounted and
screwed in place, install the video adapter and any
other peripheral adapters into the board. Check each
of the cables to ensure they are properly installed.
Note:
The Mylex BIOS has its own section that was
included with this manual. There is only minimal
mafion provided within this section and the
486
ISA BIOS Users Guide Section should be consulted
for more information.
The Mylex BIOS that is installed on the MVE486 has
a built-in CMOS setup program like many other
available. To access the setup screen, press the F2
function key at any time when prompted during the
POST. (Power On Self Test)
Use the setup screen to configure the floppy drives,
hard drives, video display type, and I/O options. For
cursor movement and other commands, follow the
on-screen prompts.
Copyright 1993
Version DO1
l - 1 3
