Mylex MAE486, Руководство пользователя, Страница: 71 / 71

Page8
MAE486 Release Notes
Documentation Errata
The following errata on Revision 1 .O (April, 1990) of
Boards have been found. Replacement manual pages are provided
with these release notes. The replaced pages should be discarded.
Page 2-2: Jumper is shown in Figure 2-l as a BERG con-
nector. It is actually a 3-pin connector.
Page 2-2: The following note has been added.
“Note: Pin 1 for each option jumper appears on the
hand side of the drawing.”
Page 2-3: The jumper setting for J2 has been reversed. The proper
setting is l-2 for operation and 2-3 for operation
(default).
Page 2-4: The jumper setting for J2 has been reversed. The proper
setting is l-2 for operation and 2-3 for operation
(default).
Page 3-1: The following note has been added.
“Note: Pin 1 for each connector appears on the left-hand
side of the drawing.”
Page 3-2: The following note has been added.
“Note: Pin 1 for each connector appears on the left-hand
side of the drawing.”
Page C-2: The same error occurs as described in Page 2-2 above.
Page C-4: In Table C-l, the same error occurs as described on Page
2-3 above.
No. Rev. A
Copyright by Corporation