Mylex MAE486, Руководство пользователя, Страница: 69 / 71

MAE486 Release Notes
q
Common Installation Problems Answers
Conflguratlon Utlllty Program and Utlllty File
Question:
Answer:
Problem:
Answer:
Problem:
Answer:
Why do need the Configuration Utility?
The Configuration Utility is a software program that
needs to be run after the system is first assembled, or
whenever any boards in the system are changed.
After installing the DCE376 and running the system con-
figuration utility, the system gives the “CONFIGURATION
ERROR SLOT error message during POST (where X
is the
in which the DCE376 is installed).
The file on the DOS diskette
should be copied onto the configuration utility diskette.
If you have a system with an early Phoenix BIOS, the
system may power up with no errors; yet when the DCE
software drivers are loaded, the system hangs.
It is necessary to do a warm boot after power-up to
write programming information from the non-
volatile RAM to any peripheral board. Phoenix en-
gineers are working on this problem. The Mylex BIOS
is in beta testing and does not have this problem.
by Corporation