39
M1.1.TPT1300-TPT2000.NLFREN 08122017
EN
7. Fill the exciter housing with exciter oil.
Do not overfill – overfilling can result in excessive
temperatures in the exciter.
8. Apply pipe sealant to pipe plug and reinstall into top of exciter housing.
9. Reinstall deck, V-belts and belt guard.
8 Storage
If the plate compactor will not be used for a period longer than 30 days, follow the steps below to prepare your unit for
storage.
1. Drain the fuel tank completely. Stored fuel containing ethanol or MTBE can start to go stale in 30 days. Stale fuel has high
gum content and can clog the carburetor and restrict fuel flow.
2. Start the engine and allow it to run until it stops. This ensures no fuel is left in the carburetor. Run the engine until it stops.
This helps prevent deposits from forming inside the carburetor and possible engine damage.
3.
While the engine is still warm, drain the oil from the engine. Refill with fresh oil.
4. Allow the engine to cool. Remove the spark plug and put 60 ml of SAE-30 of high quality engine oil into the cylinder. Pull
the starter rope slowly to distribute the oil. Replace the spark plug.
Remove the spark plug and drain all of the oil from the cylinder before attempting to start the
unit after storage.
5. Use clean cloths to clean off the outside of the compactor and to keep the air vents free of obstructions.
Do not use strong detergents or petroleum based cleaners when cleaning plastic parts. Chemicals
can damage plastics.
PLATE COMPACTOR
15
GB
3.
4.
Do not overfill - overfilling can
result in excessive temperatures in
the exciter.
Remove pipe plug from top of exciter
housing. Tilt housing upside down so oil
drains from exciter. Examine oil for metal
chips as a precaution to future problems.
Return plate housing to the upright
position.
Fill the exciter housing with exciter oil.
Apply pipe sealant to pipe plug and
reinstall into top of exciter housing.
Reinstall deck, V-belt(s) and belt guard.
Engine maintenance
Refer to the
Engine Manual
included in your
plate compactor for the information on engine
maintenance. Your engine manual provides
detailed information for performing the tasks.
5.
7.
8.
9.
6.
EXCITER
EXCITER
SHAFT
29240 29242 29255 29260 29265
60 ml
80 ml 100 ml 130 ml 130 ml
STORAGE
If the plate compactor will not be used for
a period longer than 30 days, following the
steps below to prepare your unit for storage.
Drain the fuel tank completely. Stored fuel
containing ethanol or MTBE can start to go
stale in 30 days. Stale fuel has high gum
content and can clog the carburetor and
restrict fuel flow.
Start the engine and allow it to run until
it stops. This ensures no fuel is left in the
carburetor. Run the engine until it stops.
This helps prevent deposits from forming
inside the carburetor and possible engine
damage.
While the engine is still warm, drain the oil
from the engine. Refill with fresh oil of the
grade recommended in the
Engine Manual
.
Allow the engine to cool. Remove the
spark plug and put 60 ml of SAE-30 of
high quality motor oil into the cylinder. Pull
the starter rope slowly to distribute the oil.
Replace the spark plug.
1.
2.
3.
4.
Remove the bolts that hold the deck to the
housing.
Lift entire deck with engine from housing.
Use clean cloths to clean off the outside of
the compactor and to keep the air vents
free of obstructions.
5.
Remove the spark plug and drain all
of the oil from the cylinder before
attempting to start the unit after
storage.
29242UK00M101-改.indd 15
2016/6/23 17:58:40
TPT1300: 100 ml
TPT2000: 130 ml
6. Pull up the spring bolt and fold up the wheels bracket.
PLATE COMPACTOR
16
GB
TRANSPORTING
See technical data for the weight of the
machine.
To avoid burns or fire hazards, let engine
cool before transporting machine or storing
indoors.
The unit must be transported in the upright
position to prevent fuel from spilling. Do not
lay machine on its side or top.
Secure or tie down unit using the lifting handle
to prevent machine from sliding or tipping
over.
Pull up the spring bolt and fold up the
wheels bracket.
Carefully fold the upper handle down.
Do not allow control cables to become
pinched or bent.
Store your plate compactor in upright
position in a clean, dry building that has
good ventilation.
5.
6.
7.
Machine may fall and cause damage
or injury if lifted incorrectly. Lift
using handles at base of plate.
Do not use strong detergents or
petroleum based cleaners when
cleaning plastic parts. Chemicals
can damage plastics.
29242UK00M101-改.indd 16
2016/6/23 17:58:40
copyrighted
document
- all
rights
reserved
by
FBC