MV Agusta BRUTALE 910 S, Руководство по ремонту

Страница: 58 / 112

- 42 -
Engine
B
Assembling the valve.
Insert in the order of:
A)Insert the two coaxial springs
B)Slide the semi cones into the superior disk slot and
thus place the disk on the springs
C)Assemble the head on the disassembling valve tool
n° 800094796 and compress the spring with tool
800095180 until the semi cones are inserted.
D)Using a rubber hammer strike a slight blow on the
valve so as to place the semi cones.
Before placing the semi cones be sure that
the head is not resting on a plane in order
to avoid distorting the valve. Place it onto
two bases which allow the valve to move.
E)Insert the tablet of the correct thickness and lubri-
cate its surface
F) Make sure it easily turns in its slot
G)Insert the cup after lubricating the slot
Insert the cylinder head as described in the paragraph
“Head assay assembly”.
NOTE
800095180