MV Agusta BRUTALE 910 S, Руководство по ремонту

Страница: 44 / 112

- 28 -
Engine
B
Head assy assembly
To execute this operation you need the following spe-
cial tool:
A) n° 8000A3406 piston / cylinder plane distance
measuring tool
Place the new gasket on the cylinder plane.
The gasket is of the same thickness of the one
installed before if no parts replacement occurred.
If replacement is necessary you’ll need to measure the
piston / cylinder plane distance with the n° 8000A3406
tool, tightening the head nuts at 12 N·m. The choice is
made following table below:
The cylinder base gaskets always have the same
thickness (see table).
Distance between piston Type of gasket Code
and cylinder surface. (
X
)
-0,100; -0,250 mm 0,70 8B00A2300
-0,260; -0,410 mm 0,55 8A00A2300
-0,420; -0,570 mm 0,40 8000A2300
THICKNESS N° ITEM
0,38 mm 800087771
Do not position the feeler on the projection
on the piston top.
1
-Gasket thickness
2
-Gasket code
Note
: Fit the gasket with the inscriptions facing up.
EXHAUST SIDE
K
12 Nm clamping