AMO R - AMO RR - AMO SV - AMO XT PINION - AMO RR PINION
1
2
3
4
5
2
1
3
4
5
manual for use and maintenance
EN - 54
6.11 CLEANING AND
GREASING THE GEAR-
BOX PULLEY (PINION)
- Remove the lid (1) using a flat-blade
screwdriver as a lever in the area of the
tabs (2).
- Mark the position of the screws (3) on the
relative holes of the pulley (4).
- Loosen the screws (3) and remove the
pulley (4).
- Clean the pulley (4) and seat (5) using an
appropriate product in a way to remove
any dirt and residues of grease, and then
grease generously (type of water-resistant
grease).
- Re-mount everything, proceeding in the
opposite order to disassembly.
6.12 REPLACING GEARBOX
OIL (PINION)
ATTENZIONE
Dispose of the oil used correctly
and in compliance with the
regulations in force - never throw
oil away in the sewer system or
on the land.
- Remove the lid (1) using a flat-blade
screwdriver as a lever in the area of the
tabs (2).
- Position the bike on a flat surface.
- Remove the oil loading cap (3).
- Position a basin under the oil drain cap (4)
to collect the oil and then unscrew the cap
(4) and allow all of the oil contained to flow
out.
- Re-assemble the cap (4), tightening with a
coupling torque of 3 Nm.
- Introduce the oil through the opening (5)
using a syringe:
- Quantity 60 ml
- “Pinion” type oil
- Re-assemble the cap (3), tightening with a
coupling torque of 3 Nm.
- Re-assemble the lid (1).
Bici ELETTRICA_03-2022.indd 54
Bici ELETTRICA_03-2022.indd 54
15/06/2022 17:08:24
15/06/2022 17:08:24
