AMO R - AMO RR - AMO SV - AMO XT PINION - AMO RR PINION
2
3
1
manual for use and maintenance
EN - 52
6.7 BELT TENSIONING
CHECK
- Measure the tensioning frequency of the
belt (1) through the specific tool or specific
App. The correct value is between 45 - 55
Hz.
Consult Gates Carbon Drive’s user manu-
al.
- if it is necessary to tension it, loosen the
two screws (2) on both sides and work
on the tensioning grub screw (3), on both
sides, for tensioning; tension increases by
rotating the grub screw clockwise, vice ver-
sa it decreases.
NOTE: the belt is warranted for a duration of
20.000 Km.
NOTE: check that tensioning of the grub
screws (3) is even so as that the wheel is cen-
tred in the fork.
- Correct tensioning of the screws (2) is
reached with a torque of 23 Nm.
Bici ELETTRICA_03-2022.indd 52
Bici ELETTRICA_03-2022.indd 52
15/06/2022 17:08:23
15/06/2022 17:08:23
