Muton ValuejetVJ-1604, Руководство по обслуживанию

Страница: 394 / 422

9 Troubleshooting VJ-1604 Maintenance Manual
Rev.-00 9-72
9.3.7 Problems in Using Dedicated Network Software
6 Ink spills around X rail. 1. Extension tube may be
disconnected under ink
system assembly.
• Remove maintenance
base assembly and check
if extension tube is
connected.
• Replace pump motor
assembly.
• Replace ink system
assembly.
"4.4.7
Replacing
MAIN Board"
p.4-49
"4.10.1
Replacing Ink
ID Board
Assembly"
p.4-125
2. Ink tube may be cut. Replace ink tube. "4.7.10
Replacing Ink
Tube" p.4-102
3. Print head, MAIN
board assembly and
CR board assembly
may be defective.
After removing ink cartridge,
check if each board operates
properly. "4.4.7
Replacing
MAIN Board"
p.4-49
"4.8.9
Replacing
Print Head"
p.4-114
"4.8.3
Replacing CR
Board
Assembly"
p.4-106
Table 9-15 Problems in Using Dedicated Network Software
No. Event/symptom Check item Action Reference
1 MUTOH Maintenance
Assistant does not start
up. - Perform reinstallation and
initial setting. Network
Administration
Manual
2 "Transfer failed (Data
timeout)" is displayed
during transfer. 1. Are printer and PC
connected correctly
with network cable
(crossover cable for
direct connection and
straight cable for
connection via hub)?
Yes: Proceed to (2).
No: Connect printer and
PC correctly. "7.3.3
Required
Environment"
p.7-8
Table 9-14 Symptoms, Check Items, and Actions (Continued)
No. Event/symptom Check item Action Reference