MUTOH XpertJet XPJ-1641SR, Руководство для стартапов

Страница: 32 / 48

32 Test printing
[4] Twist the knob bolt on the right side of the media holder clockwise to
tighten.
4.
Load the media into the printer
[1]
Check that the printer is powered on.
[2] From the front side of the printer, fully pull the media feed lever
towards you to release the pressure rollers.
You can access to the media feed lever from the rear side of the printer.
• To release the pressure rollers, push the lever as far as it goes.
[3] Open the front cover.
[4] From the rear side of the printer, insert the front edge of the media
into the media slot.
Note
Before inserting, rewind the media properly.
Connecting Power
and Network
Printer Initial
Setup
Viewing
Operation Manual
Safety
Precautions
Unpacking
Assembling
Test printing
Installing MSM
Site Preparation