MUTOH XpertJet XPJ-1641SR, Руководство для стартапов

Страница: 29 / 48

Test printing 29
If you want to apply torque to the media holders, follow the steps below.
2.
Enable torque on media holders
[1] Twist the knob bolt on the right side of the media holder
anticlockwise to loosen.
[2]
Twist the knob bolt on the left side of the media holder anticlockwise
to loosen.
[3]
Slide both left and right media holders about 30 cm towards the center of the slider for easy access.
[4] Tighten the knob bolts on both media holders.
[5] (When looking from the rear side of the printer) Use the screwdriver to
loosen two screws securing the roller shaft guide plate to the right
media holder.
Connecting Power
and Network
Printer Initial
Setup
Viewing
Operation Manual
Safety
Precautions
Unpacking
Assembling
Test printing
Installing MSM
Site Preparation