MUTOH XpertJet XPJ-1641SR, Руководство для стартапов

Страница: 15 / 48

Printer Initial Setup 15
4 Printer Initial Setup
Here is how to get started with your printer.
Note
Use one of the following methods to run the initial setup.
• Follow the instructions in the Startup Wizard to set up the settings via computer.
" Initial Setup Flow via Startup Wizard " P. 15
• Follow the instructions in this Guide to set up the settings from operation panel.
" Initial Setup Flow via Operation Panel " P. 17
Initial Setup Flow via Startup Wizard
Printer Initial Setup
Connecting Power
and Network
Printer Initial
Setup
Viewing
Operation Manual
Safety
Precautions
Unpacking
Assembling
Test printing
Installing MSM
Site Preparation
Install MUTOH Status Monitor to your computer
Install MUTOH Status Monitor (MSM).
Activate the printer
Enter the activation code.
Configure the initial settings
Enter the IP address and configure the initial setup on MSM.
Perform initial ink charging
Install ink bags into the printer and perform ink charging.
Load a roll media for test printing.
Load a roll media for the nozzle check printing.
Run a nozzle check and perform cleaning
Run a nozzle check print and perform cleaning until all nozzles are clear.
Initial setup is now complete!