Mustek DVD-R100LB, Руководство пользователя

Страница: 20 / 80

16
Initial OSD Settings
SCHEDULE
Exit SETUP
DateTime
Program List
SCHEDULE SCHEDULE PROGRAM LIST
Entry Freq Start Duration Source Qual. On/Off
Cancel RETURN
Confirm
01
Disc Space available:
���
���
���
���
����
09
�
24
�
04 03:00PM 02:30 Ch072 SP Off
01:00
02:01
03:02
04:03
06:05
���
Change selection
IMPORTANT:
After setting up the recording schedule, make sure to switch your recorder to Stand-by mode in order to activate the
schedule recording. A short message will appear reminding you the recording date and time. A “ REC” red light
will also appear on your LED screen representing schedule recording is ON.
If the time settings of two different recording schedules overlap, the schedule with a later time setting will not proceed
recording during the overlapped time. It will start to record the program right after the previous schedule fi nishes
recording.
•
Make sure Date and Time of this DVD Recorder is correct. If not, check Date/Time Setting to correct it.
•
Before setting up schedule recording, remember to put a recordable DVD+RW or DVD+R (with free space) disc
into this DVD Recorder. If not, you cannot do any recording even though schedule recording has set up.
•
While schedule recording, make sure POWER of this DVD Recorder is always on.
-To return to the Setup MENU screen, press .
-To complete the setup operation, press Setup to exit from Setup MENU screen.
2 3 4 5
1-5
SCHEDULE Setup
-continued