Step 5
Insert 8 cam lock dowels (AA) into the 8 holes
shown on the base (D). Insert 2 cam locks (BB)
into the bottom outside of each of the left and
right side panel interiors (B & A). Insert 2 cam
locks (BB) into the bottom inside of each of the left
and right side panel exteriors (E). Make sure the
cam lock arrows are pointing down toward the
base.
Push all 4 panels down onto the base (D) until
flush. Tighten cam locks (BB). Do not strip the cam
locks by overtightening them.
Place cam caps (CC) over the 8 cam locks (BB).
Step 6
Locate the top (I). Make sure the finished side
is up. Insert 8 cam lock dowels (AA) into the
holes on the underside of the top (I). Insert 2 cam
locks (BB) on the top inside of the left side panel
exterior (E) and the left side panel interior (B).
Repeat for the right side panel interior (A) and the
right side panel exterior (E). Make sure all cam
lock arrows are pointing upward toward the
top (I).
Make sure the cam lock dowels (AA) line up with
the holes on the top of the interior and exterior
panels (A, B & E). Push the top (I) down until flush.
Tighten cam locks (BB). Do not strip the cam locks
by overtightening them.
Insert 16 mounting pegs (DD) on the inside of the
left and right side storage areas.
5
Hardware Used
AA Cam Lock Dowels
x 8
BB Cam Locks
x 8
CC Cam Cap
x 8
AA
BB
CC
E
Hardware Used
AA Cam Lock Dowels
x 8
BB Cam Locks
x 8
CC Cam Cap
x 8
DD Mounting Pegs
x 16
AA
BB
CC
DD
E
