Murphy Xpansion IX3212, Справочное руководство

Страница: 44 / 62

Section 80 00-02-0829
2018-02-26 - 42 -
4.5.2 Analog Inputs 3-4, Output Diagnostics
The analog channel feedback is the value of the associated analog inputs. The analog input is
represented by a 10 bit raw value for the 0-5 V range. The output diagnostics indicate: no
fault, a short-circuit, an over-current condition or an open-circuit.
CAN message sent by the PDM to communicate the measured values of Analog Inputs 3 and 4 as well as the
Output diagnostics.
Transmission Repetition
20 – 500 ms
Data Length
8 bytes
Data Page
0
PDU Format (PF)
239 Proprietary A, PDU1 format
PDU Specific (PS) 17 (11h)
DA (Source Address of the configuring display or
controller)
Priority
5
Parameter Group Number
61184 (EF00h) - Feedback and Diagnostics
Start Position Length Parameter Name Reference
1 1 byte Feedback and Diagnostics Identifier 4.5.1.1
2.7 2 bits Output 1 Diagnostic 4.5.2.1
2.5 2 bits Output 2 Diagnostic 4.5.2.1
2.3 2 bits Output 3 Diagnostic 4.5.2.1
2.1 2 bits Output 4 Diagnostic 4.5.2.1
3.7 2 bits Output 5 Diagnostic 4.5.2.1
3.5 2 bits Output 6 Diagnostic 4.5.2.1
3.3 2 bits Output 7 Diagnostic 4.5.2.1
3.1 2 bits Output 8 Diagnostic 4.5.2.1
4.7 2 bits Output 9 Diagnostic 4.5.2.1
4.5 2 bits Output 10 Diagnostic 4.5.2.1
4.3 2 bits Output 11 Diagnostic 4.5.2.1
4.1 2 bits Output 12 Diagnostic 4.5.2.1
5 2 bytes Analog Input 3 4.5.1.3
7 2 bytes Analog Input 4 4.5.1.3