FRONT PANEL OVERVIEW: Fox /Generator
6
From Top to Bottom (Left to Right)
4.
HDCP Indicator LED – Indicates the presence of HDCP
ON - HDCP is enabled (1.4 or 2.2)
OFF - No HDCP detected
5.
Status Indicator - Indicates that a Hot Plug event has occurred and there is a successful connec
-
tion between the source, sink, and repeaters in the system.
NOTE:
For a full list of all available timing/resolutions from Vesa up to 8k, see Page(s) 12-13.
6.
8K Button – Choose from a list of 8K timings up to 40 Gbps FRL.
7.
4K Button – Choose from a list of 4K timings up to 18 Gbps.
8.
1080 Button – Choose from a list of High Definition (HD) 1080 timings.
9.
720 Button – Choose from a list of High Definition (HD) 720 timings.
10.
Power Button – Press and hold to power the unit on or off.
11.
VESA Button - Choose from a list of VESA timings.
12.
Auto Button – When pressed the generator will read the EDID from the sink device that it is
connected to. It will then output an audio video signal based on the preferred timing int the EDID.
Note: The battery charge level and Firmware versions are also on this page. To view this informa
-
tion press the down navigation Button.
xx Image HERE highlighted down Button-xx
