10
version 2.X.
·
NO HDCP - If chosen, the analyzer will only accept a signal that has no HDCP (unencrypted).
9.
Video Button – Press to see active video material (this will bring you to the home/preview screen).
10. Info Button – When pressed the analyzer will display the signal & timing information of the
device under test (source/repeater).
NOTE: The Firmware versions are also on this page. To view this information press the down navi
-
gation Button.
xxIMAGE HERE highlighted down Button/front screen of anlyzerxx
11.
Up/Down Buttons – Use these Buttons for navigating and selecting menu items.
NOTE: While in the Live Preview screen these Buttons serve no function.
12.
OK Button – Use this Button to confirm selections while in a menu.
13.
A/B Buttons – These are PRESET Buttons. You can save two presets (A or B). These Buttons
have two functions.
·
Press and hold either the A or B Button for 3 seconds while connected to the device that you
would like to save the EDID from. Next you will see a “Copy EDID” screen. You must press
the OK Button confirm your selection.
»
You should see the message "Success", this confirms the EDID copied successfully.
»
If you get "Failure" the EDID did not save. Check connections and verify the device you
are connected to is powered on and has an EDID to copy.
·
Quick press either the A or B Button to select one of the stored EDIDs.
