Muratec MFX-3091, Быстрый старт

Страница: 51 / 120

- 51 -
Scanning to E-mail
4
Scanning
6
Press the <SETTING> key on the
operator panel.
7 Press the to select [Easy Setup], and
press
OK
.
8
Enter the administrator password.
The factory default password is “aaaaaa”.
a
Press , , , to select the
character you want, and then
press
OK
.
- The selected character is entered as “*” in
the text field.
- If you have entered an incorrect value,
press the <CLEAR> key and then enter
the correct value.
b
Repeat step
a
until all characters
required are entered.
c
Press the and to select [Enter]
and press
OK
.
9
Press the to select [Network
Setting], and then press the .
10
If setting the IP address manually, check
that [Manual] is selected, and press
OK
.
If obtaining the IP address automatically, press
the to select [Auto], and press
OK
. Proceed to
step 15.
11
Enter the IP address using the ten-key
pad, and press
OK
.
To move to the next box, press the .
12
Enter the subnet mask using the ten-key
pad, and press
OK
.
To move to the next box, press the .
13
Enter the default gateway address using
the ten-key pad, and press
OK
.
To move to the next box, press the .