Muratec F-65, Руководство по эксплуатации

Страница: 51 / 114

Beyond the basics
2.16
Broadcasting
The basics of broadcasting
The fastest way to fax one document to many recipients is broadcasting. You can
use broadcasting from any function requiring the entry of a fax number!
That means you can perform delayed broadcasting (see right column) and even
broadcasting to “hub” units for relay broadcast initiation (see next page).
In an ordinary broadcast, you send a fax as you normally would, except you add
more fax numbers. You can enter up to 120 numbers (20 normally dialed numbers,
plus 100 autodialer numbers).
Note: If you frequently broadcast a document to the same set of remote fax
machines, you can group these units’ phone numbers together under a pro-
grammable one-touch key (see page 2.28). In this way, you can initiate a
broadcast at the touch of just a single button.
We’ll assume you are familiar with regular fax transmission, and shorten the
instructions.
1
Insert the document and make any necessary adjustmentsl.
2
Press
COM
-
OPTIONS
once.
3
Press
ENTER
. The
LCD
shows:
4
Enter the first fax number — a one-touch number, a speed-dial number or just
a regular number dialed from the numeric keypad.
5
To add each additional fax number, press
ENTER
between each one to insert a
comma, then enter the number as in step 3. You can include up to 120 numbers
for a broadcast (see first paragraph, above).
Important: Do not insert a comma after the last fax number.
Note: If you enter characters by mistake, just press
CANCEL
to clear them
before proceeding.
6
Press
START
. Your fax machine will scan the document into memory and then
send it to each number you have entered.
Delayed broadcasting
What if you want the broadcast to happen later? That’s the purpose of setting up a
delayed broadcast.
1
Follow steps 1-5 of “The basics of braodcasting” (left column).
2
Press
COM
-
OPTIONS
twice.
3
Press
ENTER
. The
LCD
shows the current date and time, such as:
4
Use the numeric keypad to enter the day of the month and time you want the
fax broadcast to occur.
Here, we set it to occur at 10:15
PM
on the 30th.
5
When finished, press
ENTER
to save the setting.
6
Now, press
START
. Your machine returns to its normal standby mode, while
showing this on the
LCD
:
This means your fax machine is “reserved” for the delayed broadcast you
just programmed.
** Reserved **
Time : 30/22:15
Time : 01/15:10
2.Delayed
C,9-5551204,S05
_
1.Broadcast